Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Custom & Geometric Windows in Miami Beach: What to Know First
TruePane Windows & Doors provides independent Therma-Tru custom and geometric window service across Miami Beach: arched units, eyebrow transoms, half-rounds, pentagons, octagons, and oversized openings that push the limits of what a frame can hold. Most Therma-Tru custom window work in Miami Beach runs $450 to $2,800 per opening depending on size, glass package, and whether the unit needs full replacement or targeted frame and sash repair. Turnaround typically runs five to ten business days on custom-shape orders, with faster options when the opening can accept a standard-adjacent configuration.
If you own a Therma-Tru front entry system with a custom arch or geometric sidelight and you are noticing condensation between panes, a door that no longer clears the threshold in July, or daylight at the top of a curved frame, this page is for you. Call (386) 406-9359 and a real person answers, day or night.
How Therma-Tru Products Fail - and How We Fix Them
We have serviced enough Therma-Tru openings in Miami Beach to know exactly where the brand’s custom shapes go wrong. Salt air, humidity swings, and storm-driven water pressure expose weaknesses that a showroom floor never will. Here is what we see most, and what we do about it.
- Classic-Craft and Fiber-Classic curved transoms losing seal at the spring line. The arched radius is where the fiberglass skin meets the frame cap, and after eight to ten years of Miami Beach salt air, that seam opens by a millimeter or two. Water wicks in, the foam core drinks it, and the sash starts binding at the apex. We pull the trim, re-bed the radius with marine-grade sealant, and repair the cap rather than masking it with caulk. Caulk is a bandage; re-bedding is the fix.
- Smooth-Star geometric sidelights (pentagons, trapezoids) developing corner fog. The seal failure usually starts at the tightest angle of the glass, because that is where the spacer bar carries the most thermal stress. We see it on west-facing Miami Beach elevations worst, where afternoon sun beats on a facade that was already warm from the morning. We replace the insulated glass unit to Miami-Dade high-velocity-hurricane-zone spec, not to the original out-of-area standard.
- Therma-Tru entry door frames settling out of square, dragging custom-shaped sidelights with them. In older Miami Beach homes, the door opening was framed forty or fifty years ago, and the foundation has since gone its own way. The Therma-Tru frame was installed true, but the building moved. We realign the frame, shim the jambs back to true, and reset the geometric sidelight so it seats flush with the weatherstripping instead of fighting it.
- Decorative glass caming (the metal between panes in Therma-Tru’s decorative glass packages) oxidizing in the salt air. This is a uniquely coastal problem. The caming is protected inside the sealed unit, but if the outer seal breaches even slightly, Miami Beach air gets in and turns the zinc caming to powder. The glass looks milky from the inside and no amount of cleaning fixes it. The unit gets replaced; decorative glass is not repairable once caming oxidation takes hold.
- Oversized Therma-Tru openings (picture windows with radius tops, large octagonal units) with insufficient king stud reinforcement. We find this on homes where a previous contractor had a good idea and a short lumber list. The opening flexes in high wind, the frame torques, and the glass gets micro-cracks in the corners before it eventually fails entirely. We reframe the rough opening, install the correct header, and bed the new unit the way a Miami-Dade inspector wants to see it.
Our Therma-Tru Custom & Geometric Windows Process
No dispatch lottery, no “we’ll get to it when we can.” A Therma-Tru custom window job at TruePane runs the same sequence every time, and you get the same two things: a written line-item quote and both warranty layers registered before the truck leaves.
- 1
Call and talk to a person. You call (386) 406-9359. A live person answers, asks about the opening, and schedules the visit. No phone tree, no callback form.
- 2
On-site measurement and condition read. Our technician measures the opening twice, checks the rough framing, confirms the true shape of the arch or angle, and identifies whether this is a glass-unit replacement or a full-frame job. If the opening is out of square, we tell you then and show you with a level.
- 3
The parts decision, in writing on the quote. Therma-Tru-specific parts and insulated glass to Miami-Dade spec get priced line by line. Where a quality aftermarket component does the job without risking the manufacturer warranty, we say so and explain the trade-off. You see the numbers side by side.
- 4
The repair or replacement. Background-checked, uniformed technicians do the work. For custom geometries, we cut and set to the measured shape, not a guess from a photo. Shims get tapped in, not kicked in.
- 5
Warranty registration before cleanup. Both manufacturer layers registered in writing, durations stated, while the truck is still in your driveway. Then we sweep up, haul off the old unit, and walk you through what was done.
- 6
The Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing, no fine print.
What Therma-Tru Custom & Geometric Windows Costs in Miami Beach
Honest numbers, in the real Miami Beach market, as of this season. What moves the price is glass package (impact-rated laminate runs higher), the complexity of the shape, and whether the rough opening needs framing work before a new unit goes in.
- Standard-adjacent custom Therma-Tru window (single opening, stock glass): $450-$900 installed
- Insulated glass unit replacement for a Therma-Tru picture or geometric window: $600-$1,400, depending on size and whether it carries impact-rated laminate
- Arched, eyebrow, or half-round Therma-Tru with high-velocity-hurricane-zone glass: $1,200-$2,400 installed
- Full-frame replacement for an oversized or out-of-square Therma-Tru opening, including reframing: $1,800-$2,800 plus materials
- Quick hardware and weatherstripping service on a Therma-Tru door or window: starts at $89 as our maintenance visit
We do not change the price once the work starts. The number on the written quote is the number on the bill. Call (386) 406-9359 for an exact quote on your opening. Estimates are free.
Why Miami Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We are not a franchise. We are not the cheapest. We are the last call a homeowner should need to make for a Therma-Tru window or door. Dale Kessler founded this company in 2008 on a rule he keeps on the whiteboard: if the pane is not true, the job is not done. More than forty-two years of family trade tradition backs every opening we touch in Miami Beach.
Every job carries the Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck pulls away. Our technicians are background-checked and uniformed, and they walk a customer’s home the way they would walk their own mother’s. If your Therma-Tru opening is beyond sensible repair, we are authorized installers for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, and we quote those options side by side on paper so you can see exactly what you are buying. A live person answers our phone 24 hours a day, seven days a week, because we plan to be serving Miami Beach in thirty years.
FAQs
No, not when the work is done correctly and the right parts are used. We are an independent Therma-Tru service provider, not a manufacturer-authorized shop, but we follow warranty-safe practices: OEM parts where the warranty demands them, documented aftermarket alternatives only where the manufacturer allows, and full registration of both warranty layers on every job. If a mistake we make voids a warranty, the Done Right Promise puts it on us to fix. Call (386) 406-9359 to talk through your specific window.
Most custom shapes run five to ten business days from order to install. A stock-adjacent glass unit can often go in faster. We quote the lead time on paper when we quote the price, so it is not a surprise. Call (386) 406-9359 and we will tell you where things stand for the current season.
Yes. We measure the rough opening and the existing sash, not a photo of it. The radius is confirmed with a jig at the job site, and the replacement is fabricated to that measured shape, not to a catalog assumption. If it is not right in the opening, it is not right. Call (386) 406-9359 and we will send someone to measure.
Depends on what failed. A failed glass seal with good frame and hardware is almost always cheaper to fix by replacing the insulated glass unit alone, typically $600 to $1,400 in Miami Beach. A frame that has been torqued by a shifting opening or fed on by salt air for a decade often needs full replacement, and we will tell you straight which one you are looking at, with numbers on paper for both. Call (386) 406-9359 for a free estimate.
We measure the opening twice. We quote manufacturer lines side by side on paper. We register both warranty layers before we leave. We put a 90-day promise on the work in writing. And we answer the phone when you call. In Miami Beach, where salt air punishes shortcuts, that is the whole difference. Call (386) 406-9359 and find out.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.