Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 80 Awning Window in Miami Beach, FL | TruePane Windows & Doors
The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even when Miami Beach afternoon rain rolls through. It’s built around a thermal break that cuts heat transfer through the frame, which matters when your air conditioning runs nine months of the year. TruePane Windows & Doors is an authorized ViewLux installation partner, so when you buy this window through us, you’re getting factory-backed product knowledge and an install that actually preserves the warranty. Call (386) 406-9359 to talk specs, pricing, or timing for your Miami Beach project.
Product Overview - VLX 80 Awning Window
Awning windows have a specific job in Florida architecture, and the VLX 80 does it better than most. Because the hinge sits at the top and the sash swings outward, rain hits the glass and runs off instead of coming inside. That means you can keep the window cracked during a Miami Beach downpour and still get airflow without puddles on the sill. For a condo on West Avenue, a 1930s Spanish-style home in Flamingo Park, or a mid-century renovation in North Beach, this window gives you ventilation control that casement and double-hung units simply can’t match.
The frame is extruded aluminum with a wall thickness of 0.079 inches and a profile width just under two inches. That slim sightline keeps the glass area generous, which is what you want when your view is Biscayne Bay or the Atlantic. The hardware is engineered for a smooth open-and-close cycle, and the multi-point locking system pulls the sash tight against the weatherstripping when closed. We install these throughout Miami Beach, FL, and the feedback we hear most often is about how solid the window feels compared to budget aluminum frames.
The thermal break is the other half of the story. Standard aluminum conducts heat like a frying pan. The VLX 80 separates the interior and exterior frame sections with a non-conductive barrier, so the outside of the frame can be hot to the touch while the inside stays at room temperature. That lowers your cooling load and nearly eliminates interior condensation during humid Miami Beach summers.
Technical Specifications
Here are the numbers that matter when you’re comparing awning windows in Miami Beach, FL:
- Frame material: Extruded aluminum with thermal break
- Wall thickness: 0.079 inches
- Profile width: 1.97 inches
- Operation: Top-hinged, bottom-outward awning
- Glass options: Clear, Frosted, Low-E, Tempered, Laminated
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screen options: Fixed screen, retractable screen
- Performance standards: NFRC-rated thermal performance, AAMA 2400/2410 installation compliance, AAMA 812 sealant specification
- Impact option: Laminated impact-resistant glass available for wind-borne debris zones
Every unit is custom-sized to your rough opening. There’s no stock-sizing compromise, which matters in older Miami Beach buildings where openings were rarely built to modern dimensional standards.
Performance Features
Thermal Efficiency - The thermal break in the VLX 80 frame interrupts conductive heat transfer, and when paired with Low-E glass, the whole assembly earns NFRC energy ratings that hold up to Florida sun exposure. We’ve seen cooling bills drop measurably in Miami Beach condos after replacing single-pane aluminum originals with this unit.
Acoustic Performance - Laminated glass adds a sound-dampening interlayer that takes the edge off traffic noise from Collins Avenue or Alton Road. The tight compression seal on the closed sash also reduces air-gap sound leaks. If you’re on a lower floor near Washington Avenue nightlife, option laminated glass and hear the difference immediately.
Airtightness & Weather Seal - The closed sash compresses continuous weatherstripping around all four sides. That air seal is what keeps humidity out of the frame cavity and your conditioned air inside. In Miami Beach, where the dew point hovers near 75°F for half the year, an airtight frame is not a luxury; it’s the difference between a dry sill and mold growth.
Waterproofing - The awning orientation naturally sheds water, but the perimeter installation detail matters just as much. TruePane installs every VLX 80 with AAMA 812 compliant low-expansion foam on all perimeter joints, then tooled sealant at the exterior. That’s the correct sequence for a watertight rough-opening connection in Miami Beach’s wind-driven rain conditions.
Wind Resistance - These windows are wind-load rated for Miami-Dade climate requirements when specified correctly, and the impact-rated laminated glass option meets code for wind-borne debris zones. An awning’s compression-locked sash is inherently strong against positive and negative pressure cycling during a storm.
Security & Hardware - The multi-point locking system engages at staggered points along the sash, not just one central latch like older awning designs. When closed and locked, the window is effectively impossible to pry from outside without destroying the frame. That’s real peace of mind for ground-floor units in South Beach.
Color & Glass Options
The VLX 80 comes in six finishes. Premium Black is the strongest seller in Miami Beach right now, particularly on modern builds in Sunset Harbour and the new construction along Bay Road. It reads crisp against white stucco and pairs well with black-framed interior design. Pure White is the safe, classic choice for older condos and rental properties where resale value depends on neutral appeal. Anodized Silver is a raw, architectural aluminum finish that fits industrial-style lofts and mid-century buildings. Bronze suits Mediterranean revival homes in Flamingo Park and the Venetian Islands. Champagne is a warm metallic that works beautifully with travertine and cream exteriors. Teak Wood gives you a wood look without wood maintenance, ideal for traditional homes that want the warmth of timber with aluminum durability.
On the glass side: Clear for maximum unfiltered light, Frosted for bathrooms and street-facing ground-floor windows where you want daylight without a view in, Low-E for the energy savings and UV protection that Miami Beach sun demands, Tempered for safety glazing where code requires it, and Laminated for impact resistance and sound control. You can combine Low-E and laminated for the full-performance package.
Installation by TruePane Windows & Doors in Miami Beach
Here’s the honest truth about awning windows: the product is only half of what you’re buying. A perfectly engineered window installed with gaps, unlevel, or without proper perimeter sealing will leak, bind, and void its warranty. We see poorly installed windows in Miami Beach constantly, often in vacation rentals and quick flips where someone hired the cheapest crew available.
TruePane Windows & Doors installs every VLX 80 per AAMA 2400/2410 installation standards, which is the recognized national specification for proper window installation. Our process starts with a pre-install inspection of the rough opening to check framing condition and dimensions. Then we set the window level, plumb, and square, using shims at manufacturer-specified locations, never at random points that stress the frame.
Perimeter sealing uses AAMA 812 compliant low-expansion polyurethane foam on all four sides, followed by a tooled exterior sealant bead. This sequence prevents both water intrusion and air leakage. We do a final water test on the installation and inspect the operation of the sash and hardware before we call the job done. Cleanup includes hauling away the old window, which matters in Miami Beach where disposal rules are strict.
Because we’re an authorized ViewLux installation partner, our installs keep the manufacturer warranty intact. Let an unlicensed crew touch these windows and that warranty evaporates. That alone is worth the call to (386) 406-9359.
Frequently Asked Questions - VLX 80 Awning Window
Lead time typically runs 4 to 6 weeks from final measurement to delivery at our Miami Beach warehouse. Custom finishes like Teak Wood or Champagne sometimes add an extra week. We’ll give you a written timeline before you commit. Call (386) 406-9359 and we can check current factory scheduling for your exact size and configuration.
The VLX 80 with Low-E glass typically meets the ENERGY STAR criteria for the Southern climate zone, which can qualify for federal energy tax credits when installed in a primary residence. Your tax professional should confirm eligibility for your specific situation. We can provide the NFRC label documentation you’ll need.
The VLX 80 carries a manufacturer’s warranty on the frame, finish, hardware, and glass, and the install warranty from TruePane Windows & Doors covers our workmanship in Miami Beach, FL. The specifics depend on the configuration you choose, and we’ll put the full warranty terms in writing before you sign anything.
Yes. Every VLX 80 is built to your rough opening dimensions, not pulled from stock. That’s essential in Miami Beach where older buildings in South Beach and North Beach have window openings that vary by an inch or more from unit to unit. We take exact measurements before ordering.
Rinse the frames and tracks with fresh water every two to three months and wipe the gaskets with a mild soap solution. In Miami Beach, salt air can etch untreated aluminum over time, so do not use abrasive cleaners. The powder-coated finishes on the VLX 80 resist salt corrosion well, but regular rinsing keeps them looking new. Keep the track drains clear and lubricate hinges annually.
Get a Quote - VLX 80 Awning Window in Miami Beach
If you’re considering the VLX 80 for your Miami Beach home or condo, the next step is a free on-site measurement and quote. We’ll bring finish and glass samples so you can see the actual colors, not a swatch on a screen. Call (386) 406-9359 to schedule yours.
Written by the team at TruePane Windows & Doors, serving Miami Beach, FL with factory-authorized ViewLux window installation since 2010.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
