Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Miami Beach: What to Know First
Custom and geometric PGT windows in Miami Beach are part repair, part craftsmanship. We’re an independent PGT service provider, and most custom & geometric work we take on runs from diagnostic call to finished install in about two to three weeks, depending on the shape and the glass package. Pricing lands where honest work lands: a standard geometric PGT replacement in Miami Beach typically runs $900 to $2,400 per opening, and a true custom shape with impact glass can push past $4,000. If you own a PGT window that’s no longer square in its opening, fogged between the panes, or binding at the corners, this page tells you what’s actually going on and what it costs to fix. Call (386) 406-9359 and a live person answers, day or night.
How PGT Products Fail - and How We Fix Them
PGT builds a solid window, and Miami Beach’s salt air and storm cycles test every seal and every frame corner. Here’s what we see on custom and geometric units.
- Arched and radius PGT units lose their seal at the apex first. The curved glass puts uneven stress on the spacer bar, and after eight to ten years of Miami Beach humidity, moisture gets in and fogs the top of the arch. We see this most on PGT’s WinGuard and SpectraGuard lines. The fix is a glass package replacement, not a whole-window swap, which keeps the frame and the warranty story intact.
- Geometric windows bind at the corners when the frame was shimmed wrong at install. A triangle or trapezoid doesn’t forgive a quarter-inch error the way a rectangle does. On PGT Series 7700 and 5500 units, a binding corner usually means the rough opening wasn’t checked with a square before the frame went in. We pull the trim, re-square the opening, and reset the window so it operates without dragging.
- Oversized PGT picture windows crack at the lower corner on the windward side. Miami Beach’s northeast exposures catch sustained wind loads, and a fixed window with no mullion support can flex enough to crack the glass at a corner. We’ve replaced enough of these to know the right fix is often a thicker laminated package and a reinforced mullion, not the same spec that failed.
- PGT casement and awning operators fail in coastal salt air faster than the glass does. The crank mechanism on an angular custom casement corrodes and the window won’t seal tight. We replace the hardware with OEM PGT parts when the warranty’s live, and with a quality aftermarket match when it isn’t, always stating the difference on paper.
- Decorative geometric panes on winGuard units develop cloudy film between the glass layers. That’s not the glass failing. It’s the internal laminate reacting to years of direct sun and salt exposure. The panel needs replacement, and the job has to be done with the right PGT-approved laminate spec or the new pane won’t match the neighbors in the same wall.
Our PGT Custom & Geometric Windows Process
- 1
Call and schedule. A live person picks up at (386) 406-9359. We book the diagnostic visit and tell you who’s coming and when.
- 2
Measurement and diagnosis. A background-checked technician measures every opening twice and reads the existing frame with a square and a level. We find out whether the problem is the glass package, the frame, the hardware, or the original install.
- 3
Parts decision on paper. We quote OEM PGT parts beside a quality aftermarket option, with the warranty difference stated clearly. You see exactly what you’re buying before you buy it.
- 4
The work. We remove the old unit, correct the opening if it’s out of square, set the new or repaired window, and weatherproof it to Miami Beach wind and salt standards.
- 5
Test and clean up. We operate the window through its full range, check the seal, and leave the job site cleaner than we found it.
- 6
Warranty registration. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing, and the Done Right Promise starts.
What PGT Custom & Geometric Windows Costs in Miami Beach
| Job Type | Typical Range in Miami Beach |
|---|---|
| Glass package replacement on a fogged PGT arch or radius | $650 - $1,400 per opening |
| Hardware replacement (casement or awning operator) | $180 - $450 per window |
| Re-set and re-square a binding geometric PGT window | $400 - $900 per opening |
| Full custom PGT replacement with impact glass | $1,200 - $3,800 per opening |
| Oversized PGT picture window with reinforced mullion | $2,500 - $5,000+ depending on glass and framing |
What moves the price is the glass package, the shape complexity, the access, and whether the rough opening needs correction. A square opening and a standard shape cost less. A second-floor custom trapezoid that’s been leaking for two seasons costs more. We give a written line-item quote before any work starts, and that’s the price you pay. No change orders, no surprise line items. Call (386) 406-9359 to schedule your free estimate.
Why Miami Beach Homeowners Call TruePane Windows & Doors for PGT Work
Dale Kessler grew up in the Normandy Isles section of Miami Beach, where the salt air off the Intracoastal teaches you exactly what a poorly sealed window frame looks like after two hurricane seasons. That’s not a marketing line. It’s why we read every opening with a square before we touch a window, and why our standard is the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and a Done Right Promise on every job. If it’s not right in the opening, it’s not right. We also service CGI, CWS, ES Windows, and ECO Window Systems, so if your job needs a different manufacturer line, we’ll quote it side by side and you can compare on paper. There’s a 5% discount for seniors and veterans, and a live person answers the phone 24 hours a day, seven days a week. Not a call center. Our people.
FAQs
Yes, in most cases. We template the opening and order through channels that still cut custom PGT shapes, including arches, trapezoids, and radius combinations. Call (386) 406-9359 and we’ll tell you honestly whether a match is possible before you spend a dollar.
Not if it’s done correctly. We register both warranty layers in writing and use PGT-approved glass specs when your warranty is live. That’s the whole point of the Keystone Standard.
Most custom geometric PGT jobs take two to three weeks from call to completion, depending on the shape and glass package. Standard replacements often go faster. We’ll give you a written timeline at the estimate.
Repair the unit when the frame is sound and the failure is in the glass package, hardware, or weather seal. Replace when the frame is rotted, out of square beyond correction, or the window no longer meets Miami Beach impact code. We’ll show you the difference on paper side by side.
When the job requires a permit, we pull it, and we pass the inspection. That’s part of the price we quote up front. Call (386) 406-9359 for an exact quote on your PGT custom or geometric windows.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.